DBduino Mega 2560 ATmega2560 Arduino compatible clone

DBduino Mega 2560 ATmega2560 Arduino compatible clone
  • Product Code: SE-DE01-09-0108
  • Availability: Back Ordered - Available in 8-10 days


10 or more Rs.1,449.00

The DBduino Mega 2560 is a compatible clone of Arduino Mega 2560 microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.

The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega8U2 programmed as a USB-to-serial converter and has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.


Microcontroller ATmega2560
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 54 (of which 15 provide PWM output)
Analog Input Pins 16
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 256 KB of which 8 KB used by bootloader
Clock Speed 16 MHz

Note: This board is a Arduino compatible clone. For official Arduino Mega 2560 manufactured in Italy, click here.
For detailed documentation, please refer official Arduino Mega 2560 page here.

Write a review

Note: HTML is not translated!
Bad             Good

Related Products (3)