L293D Arduino Official Motor Drive Shield

L293D Arduino Official Motor Drive Shield
 
  • Product Code: SE-ED01-09-0040
  • Availability: Back Ordered - Available in 8-10 days



Rs.649.00

L293D Arduino Official Motor Drive Shield

Here is a design for a full-featured motor shield that will be able to power many simple to medium-complexity projects. 
  • 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer – no jitter!
  • 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 36VDC.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
  • Pull down resistors keep motors disabled during power-up
  • Big terminal block connectors to easily hook up wires (10-22AWG) and power
  • Arduino reset button brought up top
  • 2-pin terminal block and jumper to connect external power, for seperate logic/motor supplies
  • Tested compatible with Arduino Mega, Diecimila & Duemilanove
  • Download the easy-to-use Arduino software library, check out the examples and you’re ready to go!
The motor drive, can also drive 4 dc motor can be 600MA through each motor, motor can be run in to the 36V voltage between 4.5 V.Can also drive two stepper motor and two steering gear.

 

Documentation:

Write a review

Note: HTML is not translated!
Bad             Good

Related Products (2)